Viewing entries tagged
Interior door

Racing Strips on your Doors

Racing Strips on your Doors

Racing strips on your doors

https://rmwraps.squarespace.com/racing-strips-door-wraps

Love Racing Strips. Add them to your exterior / interior doors. Even your Refrigerator. Rm wraps custom design your doors to match your vehicle. We print out on gloss sheen vinyl or cut out solid color vinyl. (Price vary)

We have matte - satin - gloss - brushed metal - metallic - carbon fiber Vinyls. What's your poison? Once you fill out the form, I'll email you back very soon. 

Name *
Name

How to wrap a Door - Satin Black 3m 1080 Interior door

How to wrap a Door - Satin Black 3m 1080 Interior door

Satin Black Door wrap

http://www.rmwraps.com
How to install a vinyl door wrap. 

3M Scotchprint Wrap Film Series 1080 is a dual cast film specifically designed to provide dimensional stability and durability without the need for an over laminate. The pressure-activated adhesive allows you to slide and reposition the film until you apply firm pressure. The non-visible air release channels assure a fast, easy and virtually bubble-free installation. A 60-inch film width makes it possible to wrap almost any section of a vehicle without creating seams.  This material is used on the interior or exterior of your vehicle. It can be used on Interior / exterior doors, refrigerators, and trim moldings.

The material is soft and flexible allowing it to conform to contours and bend easily. After applying the Vinyl Sheet, you simply trim the excess vinyl with a sharp blade or hobby knife (not included). What you have left is a customized look without the head aches and costs associated with painting.
Rm wraps Vinyl Sheets are easy and fun to install and remove, and they won't harm the painted finish surface of your vehicle. Don't be fooled by others selling cheaper, imitation brands of vinyl. Our high performance Vinyl Sheets are designed to last longer and perform better than our competitors.

Tools you'll need:
squeegee, Heat gun or blow dryer, razor, clean paper towel, 

How to Install a door wrap from Randy Miller Rm wraps
1. Take the door knob off or handle 
2. Clean the door with rubbing alcohol. Clean the edges good. 
3. Take the paper backing down 4-6 inches
4. Tack the vinyl corner of the printed image to the corners of the door
5. Move it where you want it
6. Press the vinyl down
7. Start pulling the paper backing down every 10 inches
8. Press down and Go left to right ( repeat 7 )
9. Take your time working it down.
10. Cut the extra vinyl off around the edges and door knob
11. Last just clean the door wrap with water and your done.

208-696-1180
rmwraps@gmail.com
http://www.pinterest.com/rmwraps
http://www.linkedin.com/pub/randy-miller/7/882/166
https://twitter.com/rmwraps
https://www.facebook.com/rmwraps

Name *
Name

Real Ghost Town Door wraps

Comment

Real Ghost Town Door wraps

Real Ghost Town door wraps

Rm wraps loves to explore towns and found old doors to take pictures of. Rm wraps went to Silver City Idaho and found a lot of doors. Old metal doors, wooden doors and more. 

Silver City is a ghost town in Owyhee County, Idaho, United States. At its height in the 1880s it was a gold and silver mining town with a population of around 2,500 and approximately 75 businesses. http://www.historicsilvercityidaho.com/

Wrap your doors or refrigerator in a Real Ghost Town Metal door image. 

from 90.00
Material:
Quantity:
Add To Cart
from 90.00
Material:
Quantity:
Add To Cart
Name *
Name
Checkbox
 

Oracal Vinyl. Ideal for general Door wraps over simple to moderate curves and corrugations, conformable Series 3551RA features an advanced air-release liner and a solvent-based, grey-pigmented repositionable adhesive to make smooth application a breeze. Plus this 7-year, 2.75-mil film features a smooth, bright, ultra-glossy surface to produce vivid, life-like prints that can be removed with little or no adhesive residue for up to four years.

Tools you'll need:
squeegee, Heat gun or blow dryer, razor, clean paper towel, 

How to Install a door wrap from Randy Miller Rm wraps 1. Take the door knob off or handle  2. Clean the door with rubbing alcohol. Clean the edges good.  3. Take the paper backing down 4-6 inches 4. Tack the vinyl corner of the printed image to the corners of the door 5. Move it where you want it 6. Press the vinyl down 7. Start pulling the paper backing down every 10 inches
8. Press down and Go left to right ( repeat 7 ) 9. Take your time working it down. 10. Cut the extra vinyl off around the edges and door knob 11. Last just clean the door wrap with water and your done.

Randy Miller
208-696-1180
rmwraps@gmail.com
http://www.rmwraps.com
http://www.pinterest.com/rmwraps
http://www.linkedin.com/pub/randy-miller/7/882/166
https://twitter.com/rmwraps
https://www.facebook.com/rmwraps
https://www.youtube.com/user/rmwraps1
Skype rmwraps1

Comment