Viewing entries tagged
air release vinyl

Materials Rm wraps uses

Materials Rm wraps uses

Materials Rm wraps uses to wrap refrigerators, doors and trim molding.

Talking about using Photo tex fabric material and high quality Air release vinyl for the door wraps and Refrigerator wraps. 

Photo tex fabric material is a canvas like material with a stick back side that you can reuse numbers of times.

The Vinyl is High quality vinyl with air release, so if you get an air bubble its easy remove it. Just push the air bubble in and it gone. 

I'm using an Hp wide format Latex print. ECO friendly and prints out wonderful, bright colors. 

Rm wraps makes a lot of custom design door wraps and refrigerator wraps and Trim molding wraps.
What would you like to see on your doors? What is your passion in life? 

Photo Tex Fabric material
Photo Tex is a repositionable peel & stick polyester fabric material with an adhesive back. Photo Tex can be installed on virtually any reasonable surface and withstand different climate controls. 

Photo Tex does not peel, rip or wrinkle indoors or outdoors. Photo Tex can be moved and re-applied over and over again.  Our adhesive does not weaken or strengthen over time.. This material is US patented, green and nontoxic.

Oracal Vinyl. Ideal for general Door wraps over simple to moderate curves and corrugations, conformable Series 3551RA features an advanced air-release liner and a solvent-based, grey-pigmented repositionable adhesive to make smooth application a breeze. Plus this 7-year, 2.75-mil film features a smooth, bright, ultra-glossy surface to produce vivid, life-like prints that can be removed with little or no adhesive residue for up to four years.

208-696-1180
rmwraps@gmail.com
http://www.pinterest.com/rmwraps
http://www.linkedin.com/pub/randy-miller/7/882/166
https://twitter.com/rmwraps
https://www.facebook.com/rmwraps

Name *
Name

Why is wrapping vinyl better than paint

4 Comments

Why is wrapping vinyl better than paint

Why is vinyl wrapping  better than painting.

Rm wraps believes in wrapping a door, refrigerator, cabinets and more. Rm wraps will show you why. The Positive and negatives of painting vs wrapping.

History: Randy Miller has owned and been a Professional painter for 11 years before going into the wrapping business. He has painted a lot doors, cabinets and some refrigerators. Randy has used HVLP guns (video) Airless sprayer (Video) and Hand painted (video). Click on the video word to learn how the paint. 

Why does Rm wraps like vinyl wrapping a door?

Cleaner, no smells, installed faster and ready to use when your done, no paint drips, no brush or roller marks, no clean up, you will not get dirty, Love the look and feel of the vinyl. Even sheen, "very easy to clean". the vinyl is air release so no air bubbles, It will last for years. Its the same material as Vehicle wraps, so if it can last for 7 years out side on a car, it will last longer in your doors.

Doors

Wrapping a door with vinyl

  • Leave the door on it's frame. :)
  • 1. Take the door knob off or handle 
  • 2. If its a new door, just clean it with rubbing alcohol. If not patch the holes, sand the paint drippings down, make it smooth as you can get it. Clean the edges good. 
  • 3. Take the paper backing down 4-6 inches
  • 4. Tack the vinyl corner of the printed image to the corners of the door
  • 5. Move it where you want it
  • 6. Press the vinyl down
  • 7. Start pulling the paper backing down every 10 inches
  • 8. Press down and Go left to right ( repeat 7 )
  • 9. Take your time working it down.
  • 10. Cut the extra vinyl off around the edges and door knob
  • 11. Last just clean the door wrap with water and your done.
from 90.00
Materials:
Quantity:
Add To Cart

Painting a door 

If you brush or roll the paint, you'll need to prime and put to coats on. You will see the brush and roller marks. 

  • Step 1: The easiest way to paint a door is to start by removing it, then removing all the hardware and lay it horizontally on saw horses. This will eliminate potential drips. But, I’ve painted plenty of doors without removing them. So, it’s your choice.
  • Step 2: Lightly sand the entire door. No need to bust out the power sander, you can use a sanding block or sheet of sand paper. Be sure to sand down any bumps or blemishes. The main goal is to give your door a little “tooth” for the new paint or primer to adhere to.

  • Step 3: Time to decide if you need to use primer. Here are reasons you would need to use it:

  • If the door is bare wood or stained wood.
  • If the door is a dark color and you want to paint it much lighter.
  • If the door was painted with oil and you want to use latex paint (how to tell? Rub a small spot with ammonia and if the paint comes off it is latex.)
  • If you are painting over latex with latex (or oil over oil) and the previous paint job is in good shape you can skip the primer. (This was the case with my door, so I didn’t prime it.)

  • Step 4: Paint the panels first.Using a small roller to paint doors can greatly speed the  process. Begin by rolling paint on the panels. Work quickly by rolling on the paint, then use a brush to smooth out the paint and fill in any spots missed by the roller. Follow the arrow directions above when brushing on the paint. Drag your brush  in the same direction as the woodgrain on your door. This will highlight the grain and keep your door looking neat and clean. NEVER run your brush strokes perpendicular to the wood grain. This does NOT look professional.

  • Step 5: Next roll the inside cross pieces. Start by rolling and painting the center vertical piece. Again, drag your brush up and down vertically with the wood grain (see arrows in the above diagram.) Then paint the horizontally pieces in the middle of the door.

  • Step 6: Paint the border. Pay attention to the direction of the woodgrain for this last step. The grain on the two sides should flow vertically from top to bottom. There are header and footer panels sandwiched between the left and right sides. These “sandwiched” pieces should be painted by dragging your brush horizontally (see diagram above.)

  • Step 7: The last step is to paint the edges of the door. (Avoid painting the hinges…that’s not very professional either!)

    Roll paint onto the edges then smooth them with the paintbrush. Be on the lookout for drips or puddles of paint.Go back and check the face of your door for drips as well.

    Let your door dry (30 minutes – 1 hour), then follow up with a second coat of paint. When you are done let the doors dry for 2+ hours before flipping them to paint the other side. I have found that it helps to put a pieces of cardboard or scrap bare wood under the door so the paint doesn’t stick to the saw horses.

See more on how to do things on http://www.prettyhandygirl.com/

Tell Rm wraps what you think about the Blog

Research how to paint a door here. 

  • http://www.diynetwork.com/how-to/how-to-paint-a-front-door/index.html
  • http://www.dummies.com/how-to/content/how-to-paint-interior-doors.html
  • http://www.thisoldhouse.com/toh/how-to/intro/0,,217133,00.html
  • http://www.prettyhandygirl.com/how-to-paint-doors-the-professional-way/
  • Video Hand paint. https://www.youtube.com/watch?v=rnT6AgI_E_M

4 Comments

Elevator door wraps

Comment

Elevator door wraps

Elevator door wraps

ELEVATOR DOOR WRAPS. HOTELS, MOTELS, OFFICE BUILDING AND SOME HOMES. 

Mix-up-wood-elevator-wrap-designs.jpg

Elevator graphics  are a very effective media boasting one of the highest unaided media recall rates at 96%. They are used for corporate branding as an engagement strategy, to communicate brand messages, new product releases, and sponsorships. They are also used for event branding during conferences and expos. Malls and airports are also a popular place to execute an elevator campaign.  Just think of the applications:

  • Corporate branding
    • Engagement strategy
    • Communicating brand messages
    • New product releases
    • Showcase charitable sponsorships
  • Event branding during conferences and expos
  • Malls
  • Airports
  • High Rise Office Buildings
  • Residential Buildings

List of things Rm wraps can do

  1. Custom prints ( high quality prints and Air release vinyl)
  2. Solid High Quality Vinly ( Di-noc - Hexis and other)
  3. Textures vinyls
  4. Short term prints ( 0 -6 mouths) 
  5. Long term prints ( 0 - 7 years)

Save you money Rm wraps can print and ship it to your place. You can install the wrap or have one of your employees do it. 

If you have a lot of  doors to wrap, call Rm wraps at 208-696-1180

Name *
Name
http://
Checkbox
If you have any images or files you want to give to Rm wraps, just click on this image

If you have any images or files you want to give to Rm wraps, just click on this image

Comment